Too low to display
CraftPrice Electric Keep Warm Thermo Pot is a product that has been widely available overseas, particularly in China and USA.
It is a neat solution to an everyday problem, how to have on-demand hot drinking water available all the time. The thermopot solves this problem by heating a bulk volume of water and then keeping it at a constant temperature thereafter, which is known as Keep Warm mode.
Unlike a hot water urn, or conventional kettle, the thermo pot does not continually re-boil once the water temperature has dropped below a set temperature. Instead, it warms the water up to the pre-set temperature only.
So, if you set the temperature at 85C which is hot enough for most teas and coffee drinks, the thermo pot would only heat up to about 87C and then turn off, but continue to monitor the temperature.
The power consumed in this re-heat cycle is minimal compared to a kettle. However, if you really want boiling water, the thermo pot has a re-boil function to do just this.
The CraftPrice thermo pot has 5 temperature pre-sets and hot water can be dispensed in 3 ways :
Press the Dispense button on the Control Panel
Press up against the microswitch behind the pouring spout
Depress the manual mode plunger on the lid of the Thermo pot.
For any method, either the electric (powered mode) or manual lock (no power) has to be disengaged before water can be dispensed, which helps to prevent accidental discharges of hot water.
Auto cut-off safety features ensure the thermo pot does not boil dry or try to boil from an empty start position.
PLEASE NOTE: USE ONLY FILTERED WATER WITH THIS THERMOPOT AND CLEAN REGULARLY TO PREVENT LIMESCALE BUILD UP